Electronic Ballast by Lumatek 600 Watt Twin Dimmable

Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable Electronic Ballast by Lumatek 600 Watt Twin Dimmable
Loading ...

  • Item no.: 14587
  • Product weight: 5,00 kg
  • Shipping time: 2 - 3 workdays

Description

Electronic ballast by Lumatek 600 watt twin - dimmable

This electronic ballast can be operated with HPS and MH bulbs and used as 400 W and 600 W ballast.

To ensure a safe operation, the Lumatek Ultimate unit is programmed with an automatic shut-off mechanism, which gets activated in case of a short-circuit, during the insertion of a defective lamp or when a lamp is missing. The ballast is equipped with the best electromagnetic shielding available on the market. The electronic ballast operates completely noiseless and is surrounded by a sealed resin housing. Each unit is submitted to a 12-hour testing cycle in the factory to ensure maximum reliability.

Benefits:
- Simultaneous operation of two bulbs with a single ballast
- Operation of 2x 400 W, 2x 600W or 1x 400W and 1x 600W possible
- Very low temperature development at the housing and noiseless during operation
- Higher light output than non-electronic ballasts - up to 27% more according to Lumatek
- Higher light output than electronic, "no-name" ballasts - up to 15% more according to Lumatek
- Optimal utilization of the bulb power in terms of duration and peak performance
- Maximum lumen through booster in the final stages of the plant
- Heat reduction during summer by dimming down
- Power saving due to smaller grow bulb
- Switchable during operation

Technical details:
- Dimensions L x W x H (mm): 510 x 114 x 81
- Weight (kg): 4.8
- Material: Aluminum housing with cooling fins
- Operating modes: 360W - 400W - 600W - 600SL (Super Lumen boost up to 660W)
- Voltage: 220 - 240V 50/60Hz
- Current (A): 3.0 (x 2)
- Input power (W): 380 - 424 - 635 - 695 (x2)
- Output power (W): 360 - 400 - 600 - 660 (x 2)
- Operation frequency (kHz): < 90
- Power factor: 0.99
- THD (%): < 8
- Efficiency (%): 95
- Supply voltage range (V): 175 - 275
- Suitable ambient temperature at full load from -25 to - 40
- Humidity: Usable at a relative humidity of 0% to 90%

Scope of delivery:
1x plug cable approx. 2 meter long and 2x cable to the reflector (IEC connector), approx. 4 meter long. Both cables are included and can be easily connected.

Ratings (0)

    Average product review:

    (This product has got No Reviews)

    Share your experience with other customers

    Customers have also bought the following items