Electronic speed controller STL10 0.5-10.0 A

Electronic speed controller STL10 0.5-10.0 A Electronic speed controller STL10 0.5-10.0 A Electronic speed controller STL10 0.5-10.0 A Electronic speed controller STL10 0.5-10.0 A
Loading ...

  • Item no.: 11743
  • Product weight: 0,76 kg
  • Shipping time: 2 - 3 workdays

Description

Electronic Speed Regulator STL10 from 0.5 - up to 10 amps, ideal for control of fans and ventilators.

The electronic speed regulator of the STL series controls the speed of single phase voltage through controllable motors (230 Vac - 50 Hz) by changing the supply voltage using a phase angle control. Here a potentiometer and a separate lighted on/off switch is installed, the slowest allowed speed can be set internally by a small trimmer (factory setting = 100 V). The connecting plate has an additional connection to circumvent the ON/OFF switch (automatic start) or to branch uncontrolled 230V (three-wire motor connection, valve, flap, etc.)

There are two operating modes, selectable internally by adding or removing the red jumper on STK.

1. "Hard" start: The motor will always start (or restart) at max. speed for 8-10 seconds, followed by the motor speed adjusting automatically to the position that is determined by the potentiometer.

2. "Normal" start: The motor starts according to the position set by the potentiometer. The IP 54 housing also permits use in demanding environments.

Technical Specifications:
- Rated current (A) 0.5 - 10.0 A
- Line voltage: 230 V AC 50 Hz
- Dimensions L 178mm x W 113mm x H 92mm
- Infinitely variable speed control
- Minimum speed adjustable by trimmer
- Illuminated On/Off switch
- Max. ambient temperature: 35° C (95° F)
- Plastic housing (R-ABS, UL94-V0, gray RAL 7035)
- IP 54

Ratings (0)

    Average product review:

    (This product has got No Reviews)

    Share your experience with other customers